Skip to main content
x

How to Take Care of a Dive Watch

Eight ways to protect the investment you made in a key part of your kit.
By Robby Myers | Published On March 4, 2022
Share This Article :

How to Take Care of a Dive Watch

seiko-dive-watch-scubadivingmag.march2022.jpg

A diver returns from a dive while sporting a dive watch.

Michelle Gaylord

Tips: How to Care for Dive Watches

1. Prep Your Watch Out of the Box

Test out the metal ring or bezel that goes around the face of the watch. The bezel requires some effort to rotate it around the dial. You’ll feel it move against the internal indents as you rotate it. There are usually indentations on the outer edge of the bezel to give you a firm grasp and make it easier to move.

If you like to wear your scuba watch on top of your wetsuit, check to make sure the strap will fit around the wetsuit that you usually wear. If it doesn’t fit, the watch maker might have included extensions to lengthen the strap.

It’s worth reading the manual. Today’s dive watches have a lot of functions that are practical, useful or just downright cool. Reading up on the details of your new watch is the best way to get the most out of it.

2. Rinse After Each Dive

Make sure to thoroughly rinse your dive watch in fresh water after each dive. You should also rinse it after getting out of a pool to remove chlorine.

_an_9008_edit_scubadivingmag.march2022

A diver picks up trash while sporting a dive watch.

Scuba Diving Magazine

3. Turn the Bezel

While you are rinsing your dive watch, turn the bezel—if your watch has one—to get rid of any sand, grit, etc. that might have gotten under the dial.

4. Check Gaskets

Scuba diving watches are waterproof thanks to rubber or plastic seals inside the watch. These gaskets will eventually deteriorate and affect the water resistance of your watch. Manufacturers suggest the gaskets be changed and/or inspected anywhere from every 28 to 36 months. If you dive frequently, have the watch pressure-tested and the gaskets changed/ inspected annually.

5. Remove for Sauna or Hot Tub

Extreme changes in temperature might affect the sealing capabilities of your dive watch.

6. Screw or Push Down Crowns Tightly


Make sure the crown is either screwed in or pushed down all the way before getting in the water. Once in the water, don’t adjust the crown as water could accidentally seep in.

7. Avoid Chemicals

Do not expose watches to aerosol sprays, strong chemicals or solvents, which can damage or dry them out.

8. Check for Condensation

If you notice condensation under the crystal, take your watch to a professional immediately.